• Filter
  Name SKU Description Category
YOKOGAWA MIXED SIGNAL OSCILLOSCOPES DLM4000 The DLM4000 is a unique to the industry eight-channel mixed-signal oscilloscope suitable to test and debugging applications in the embedded systems, power electronics, mechatronics, and automotive sectors. Available in both 350 MHz and 500 MHz models, the 2.5 GSa/sec DLM4000 features eight analog input channels. The eighth input channel features Flex MSO which converts to a 8-bit logic analyzer at the push of a button; add sixteen additional logic analyzer inputs as an option, for 24-bit logic... MIXED SIGNAL OSCILLOSCOPES
YOKOGAWA SOURCE MEASURE UNIT GS610 The GS610 is a highly accurate and highly functional programmable voltage/current source that incorporates voltage/current generation and measurement functions. The maximum output voltage and current are 110 V and 3.2 A, respectively. Evaluation of over a wide range of basic electrical characteristics is possible, because the GS610 can operate as a current source or a current sink. SOURCE MEASURE UNITS
YOKOGAWA TELECOM OPTICAL SPECTRUM ANALYZER AQ6370D World-Class Optical Performance Wavelength range: 600 to 1700nm High wavelength accuracy: ±0.01nm High wavelength resolution: 0.02nm Wide dynamic range: 78dB typ. Wide level range: +20 to -90dBm Fast measurement: 0.2 sec. (100nm span) Applicable to single-mode and multimode fibers Related Products Optical Wavelength Meter  Offers higher Wavelength Accuracy, but reduced span, and sensitivity compared to the AQ6370D OSA OPTICAL SPECTRUM ANALYZER
YOKOGAWA DL850E/DL850EV SCOPECORDER Measure and analyze a wealth of signals in real-time and speed up development and fault finding. The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days. Using flexible modular inputs it combines measurements of electrical signals, physical (sensors) and CAN / LIN serial buses and is able to trigger on electrical power related and other calculations in real-time. Localized language... SCOPECORDERS
YOKOGAWA DIGITAL MULTIMETER TY520 3.5-digit (6000-count dual display, 31-segment bar graph display), RMS type Measurement Functions: Voltage, Current, Resistance, Continuity Check, Diode Test, Frequency, Capacitance, Temperature Features: Category IV 600V, Category III 1000V, USB Communication function, Closed Case Calibration (User calibration function). DIGITAL MULTIMETERS
YOKOGAWA CLEARLINE - FS/FL SERIES Operating principle: Rectifier type・Suspension type: taut band・pivot and jewel for Clear Line   Series, pivot and jewel for FS/FL・JIS C1102 - 2007, Class 2.5 Please specify model, full scale value and unit, rating and   cover color when ordering. ANALOG PANEL METERS
YOKOGAWA PRECISION POWER SCOPE PX8000 Traditional power measurement instruments cannot provide accurate time measurements; oscilloscopes are not designed to measure power. The PX8000 is the world's first precision power scope, bringing oscilloscope-style time-based measurement to the world of power measurement. It can capture voltage and current waveforms precisely, opening up applications and solutions for a huge variety of emerging power measurement problems.  Localized language brochures are available below in the... DIGITAL POWER ANALYZERS
YOKOGAWA DIGITAL RESISTANCE METER 7556 The communications industry is continually evolving, producing and demanding smaller products with advanced technologies. Yokogawa delivers quality products, such as the Digital Resistance Meter, which meet the needs for supporting smaller and more precise products. Through innovation and production, Yokogawa provides business tools to meet  the challenges of a dynamic market and such production standards as ISO9000 criteria. DIGITAL MULTIMETERS
YOKOGAWA DL850E/DL850EV SCOPECORDER Measure and analyze a wealth of signals in real-time and speed up development and fault finding. The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days. Using flexible modular inputs it combines measurements of electrical signals, physical (sensors) and CAN / LIN serial buses and is able to trigger on electrical power related and other calculations in real-time. Localized language... SCOPECORDERS
YOKOGAWA POWERVIEWERPLUS (760881) The PX8000 Precision Power Scope was released as high frequency and transient power measurement of electric energy saving equipment. In order to support that measurement and evaluation, we released dedicated software 760881 PowerViewrPlus. This software enables measured waveform and numeric data transfer to a personal computer (PC) and realizes smooth calculation and analysis. POWER MEASUREMENT APPLICATION SOFTWARE
YOKOGAWA HIGH-SPEED DATA ACQUISITION UNIT SL1000 The new Yokogawa SL1000 is the only data acquisition system that delivers independent, isolated channel hardware at 100MS/ch rates, with no compromise in bit resolution, memory depth, or streaming performance. What's New - Release of new firmware version 2.21 - July 25,2014 HIGH SPEED DATA ACQUISITION
YOKOGAWA DIGITAL MANOMETER MT220 The MT220 can measure pressure with outstanding accuracy, high resolution, minimal tempco, and excellent stability. It offers a wealth of functions for field calibration, including transmitter output measurement (DCV/DCA functions), 24-V DC output, percent error readout, measurement data memory, and Ni-Cd battery operation. The D/A conversion output makes it simple to output data to a recorder or other equipment. And of course, data output through a GP-IB or RS-232 interface is also... MANOMETERS
YOKOGAWA DC VOLTAGE / CURRENT SOURCE GS200 The GS200 is a low voltage/current DC source with high accuracy, high stability, and high resolution. With its excellent traceability, stability, and 5 1/2-digit resolution, the GS200 generates extremely low-noise DC voltage and current signals that are required for many applications. Additionally, the optional monitoring feature turns the GS200 into a voltage and current measuring instrument. PROGRAMMABLE DC SOURCES
YOKOGAWA OPTICAL TIME DOMAIN REFLECTOMETER AQ7280 Responding to the growing needs for reliable and ease-of-use field test instruments for installation and maintenance of fiber optic networks, Yokogawa AQ7280 Optical Time Domain Reflectometer (OTDR) is designed to empower field technicians to make fast and precise measurements with confidence. The AQ7280 satisfies a broad range of test and measurement needs in analyzing optical networks from access to core. OPTICAL TIME DOMAIN REFLECTOMETER
YOKOGAWA HANDY MULTIFUNCTION CALIBRATOR CA71 Signal source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse Measurement: DCV, DCA, ACV, Resistance, RTD, TC (10 kinds), Frequency, Pulse Features: Simultaneous signal source and measurement capacity, a wide array of useful functions, Easy operation, Online communication function Options: AC adapter (94012: For 100V AC, 94013: For 120V AC, 94016: For 220-240V AC), B9108WA RJ sensor, B9108XA Accessory carrying case, 91017 Communications cable CALIBRATORS
YOKOGAWA 2100A SERIES SWITCHBOARD METER RMS rectifier type, Mean rectifier type Suspension type: Taut band suspension type JIS C1102-2007, Class 1.5/2.5 Please specify model, full scale value and unit, cover color when ordering. ANALOG SWITCHBOARD INSTRUMENTS
YOKOGAWA SAFETY TERMINAL ADAPTER SET B8213ZA Two adapters in a set for current input of the PX8000 DIGITAL POWER ANALYZER ACCESSORIES
YOKOGAWA DIFFERENTIAL PROBE 150 MHZ/1400 V 701927 The 701927 is a 50:1 or 500:1 high voltage (1400V peak) probe with extended bandwidth covering DC to 150MHz, This probe provides a balanced differential input, to be used with oscilloscopes with single-ended inputs (1 MΩ Input Impedance).  This probe works with DLM2000, DLM4000, DL6000, DLM6000, DL9000 and SB5000. This probe is conveniently powered by the Yokogawa Probe Interface I/F. VOLTAGE PROBES
YOKOGAWA DIGITAL THERMOMETER 7563 Yokogawa-original A/D converter (feedback pulse width modulation method) features superior noise immunity, stability and high-speed sampling. In addition, versatile functions are suitable for system use and cover a wide variety of applications from test to R&D. DIGITAL THERMOMETER
YOKOGAWA ISOLATED ARBITRARY/FUNCTION GENERATOR FG400 The FG400 easily generates basic, application specific and arbitrary waveforms with a sine wave frequency range of .01 µHz to 30 MHz.  Output waveforms consist of Sine, Square, Pulse, Ramp, Parameter-variable, Noise (Gaussian distribution), DC and Arbitrary.  This unit includes isolated outputs that allow the user to use it in the development of floating circuits, like motor drives, inverters, power supplies and other power electronic devices.  In addition, multiple units can be... FUNCTION GENERATORS