TES-Taiwan

TES New

  • Filter
  Name SKU Description Category
AFLEX-6300 Graphic Power Quality Analyzer Display of Overlapped Voltage and Current Waveform Maximum Demand (MD in W, KW, MW) with Programmable Period Harmonics Analysis ( V and I ) to the 50th Order Display of 25 Harmonics in One Screen with Waveform Display of waveform with Peak Values (512 Samples / Period), Datalogging of 32, 64, 128 or 256 Points/Cycles Analysis of Total Harmonics Distortion ( % THD-F ) Graphic Phasor Diagram Programmable PT (1 to 3000) Ratios Capture 128 Transient Events ( Time + Cycles + Faults )... Flexible AC Current Clamp
TES-1333/1333R Solar Power Meter Wide spectral range. Excellent long term stability. Cosine corrected. Automatic transmission measurements. Select either power or transmission. Solar energy power or transmission. Current time setting function. User calibration factor setting function. End-mount light sensor. Select either W/m2 or Btu / (ft2*h) units Data Hold / MAX / AVG modes. Data Memory and Read function. (99 sets.) Auto Data memory (TES-1333) RS232 interface to PC. (TES-1333R) Solar Power Meter
TES-2732A Datalogger Multimeter (RS-232) DMM talks with P.C. via RS-232 interface Data Logger function Direct input of V, A, Ohm, Hz, Cx & o C/ o F without any further singnal modification Multimeter
CM-05 DC/AC Current Probe Accurate and High Resolution 23 mm Conductor Diameter One Touch Zero DC/AC Current Clamp Meter
TES-1356 Sound-Level Calibrator 94dB and 114dB Sound Calibration at 1KHz Accurate and Simple to use Fits 1", 1/2" or 1/4" diameter microphone Calibrator
TES-1393/1394 ElectroMagnetic Field Tester (W/RS-232) The EMF tester is designed to provide user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances and industrial devices. The EMF tester is a cost effective, hand-held instrument designed and calibrated to measure electromagnetic field radiation at different bandwidths down to 50Hz/60Hz. Display micro Tesla & milli Gauss in the same tester. Data hold, Peak hold function. USB Optical inter face. (1394) 999 Datalogging... EMF Tester
TES-1362 Printing Humidity Temperature Meter Triple LCD Display for RH% Humidity, T1 for Air Temperature and T2 Type K Thermometer (-200 ℃ ~ 1333 ℃ ). Dew Point Reading. Max / Min / Data Hold. Real Time Stamp. Periodically Print out from Pre-Set time Interval. Humidity / Temperature Meter
TES-3660 Autoranging Insulation Tester Large LCD with analog bar graph and digital display. 250V, 500V, 1000V output voltage for insulation M Ω testing. 4000M Ω insulation testing with automatically switch to voltage measurement. Lo Ω function for testing connections. Autodischarge of capacitive voltage charges. Last reading HOLD display. AC/DC voltage measurement up to 1000V. Manual data memory and read function (9 sets). Meets EN61557 and IEC1010-1, CAT III 1000V. Size : 235(L)x116(W)x54(H)mm (9.3"Lx4.6"Wx2.1"H) Insulation Tester
TES-1339 Light Meter Pro. Dual Display, 4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0.01 to 999900 Lux,0.01 to 99990 fc, Autoranging 5 step. Accurate and Instant response. Integral illuminance measurement. Luminous intensity measurement. Data Hold function. Data memory and read function. Reference value setting for relative or percentage deviation measurement. Ripple measurement for STRAY + LIGHT function. Time-hold function. Point - average... Light Meter
AVM-305 Anemometer Sensitive and Accurate Ergonomic and easy-to-use design Large 4 digits LCD (Liquid Crystal Display) 1.8 meters coiled cable and mounting nut for long extension Low power consumption Hold/Max/Min/Ave functions Build-in low battery indicator Smart Auto-Power-Off (10 minutes) RS-232C Interface with PC Optional Thermal Printer PROVA 300XP Air temperature measurement Anemometer
TES-3079K Power Clamp Meter HVAC Application: Check current draw in motors and compressors. Use MAX/MIN/Recording in the temperature mode to assess efficiency. Test run/start capacitors. Confirm low voltage control signals. Measure flame safeguard device current draw. Confirm power sources. Analyze temperature and voltage or current data with the aid of the time stamp. Insulation test up to 100M Ω. Electrical Application: Check for energized circuits and balance loads. 1 Φ /3 Φ (3P3W/3P4W)Power... Power Clamp Meter
TES-1306 Thermometer K/J Type thermocouple input Auto ranging Maximum / Minimum reading Relative reading Multi-channels scanner (T1-->T2-->T1 - T2) Thermometer/Infrared Thermometer
TES-1352H Programmable Sound Level Meter Auto ranging 0.1dB Resolution Range from 30 to 130dB A&C Frequency Weighting Fast/Slow dynamic characteristic 32000 Records Data logging function USB interface Real time clock with calendar Sound Level Meter
PROVA-6200 Graphic Power Quality Analyzer Analysis for Single Phase and Balanced 3 phase system True RMS Value (V and I) Active Power (K,KW,MW,GW) Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR) Power Factor (PF), Phase Angle( Φ ) Energy (WH,KWH,KVARH,PFH) Programmable PT(1 to 3000)Ratios Display of Overlapped Voltage and Current Waveform Maximum Demand (MD in W,KW,MW) with programmable Period Harmonic Analysis (V and I) to 50th Order Display of 25 Harmonics in one screen Optical Isolated RS-232C Interface Smart... 3 Phase Power Analyzer
PROVA 801/803 Digital Multi-Meter 60,000 count and dual input channels 0.04% DC basic accuracy and 0.2% AC basic accuracy Bandwidth of 10KHz(max) Fast ACV, ACA response Dual channels measurement similar to a dual channels DSO(V+V,V+A) Hz + duty cycle dual display Capacitance measurement Standalone data logging of 10,708 records for both channels(803) RS-232C interface Application Software (Option) 1/7 the cost Multimeter
CM-07 TRMS DC/AC Clamp Meter High Resolution DC 10mA, AC 1mA True RMS Non-contact Current Frequency Measurement DC/AC Current Clamp Meter
TES-1364/1365 Datalogging Humidity Temperature Meter Data Hold & Relative function Dual LCD display with Bargraph indication Continues Recorder 15000 data sets(TES-1365) Dew Point Reading USB interface & windows software(TES-1365) Wet bulb Reading Automatic Timer Recording for Datalogger(TES-1365) MAX/MIN with Time Stamp Humidity / Temperature Meter
TES-1339R Data Logger Light Meter Pro. Dual Display, 4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0.01 to 999900 Lux,0.001 to 92927 fc, Autoranging 5 step. Accurate and Instant response. Integral illuminance measurement. Luminous intensity measurement. Data Hold function. Data memory and read function. Data logger function. Reference value setting for relative or percentage deviation measurement. Ripple measurement for STRAY + LIGHT function. Time-hold function. Point... Light Meter
AVM-01/03 Anemometer Sensitive for low/high air velocity Ergonomic Design 0.0~45m/s range Anemometer
AC Voltage (50Hz to 400 Hz):Trms Range Resolution Accuracy Sensitivity Overload Protection 999.99 mV 0.1mV ±1% ± 0dgts(50,60Hz) ±2%±20dgts(40~100Hz) 2.0mV 600V 9.999 V 1mV 0.020V 99.99V 10mV ±1% ± 20dgts(50,60Hz) ±2% ±20dgts(40~ 3-3/4 Digital LCD, 4000 count, Autoranging. Trms KW, Current, Voltage measurement. AC Current 0.1A to 700A. Resistance and Continuity test. Data hold & MAX function. Pocket size. Auto Power off. IEC1010-1 CAT III 600V Power Clamp Meter