You have 0 items in your cart.
Fluke
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
Fluke Networks FQM-MAIN Fiber QuickMap | One-button troubleshooting – no lengthy set-up necessary Six-second test time – no more blind troubleshooting that can last up to hours Locate high loss incidents or breaks – find the most common causes of fiber failure Locate reflective incidents – discover causes of bit error rates, a primary source of network performance degradation Locate multiple incidents – quickly see potentially problematic connections in the channel | Fiber Certification and Testing |
|
|
|
Fluke Networks FIBR-1-SHOTPRO Service Provider Fiber Troubleshooter | Measure up to 75,459 feet (23,000 metres) of fiber in seconds Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber Save and store up to 99 test results for later review Confirm channel connectivity by analyzing the fiber link Locate sources of bit-error rates caused by end-face contamination or poor connection leads Reports up to nine multiple events per fiber link | Fiber Certification and Testing |
|
|
|
Fluke Networks VisiFault Visual Fault Locator | Locates faults including tight bends, breaks and bad connectors Accelerates end-to-end fiber checks Easily verifies polarity and identifies fibers Features continuous and flashing modes Ergonomic case survives drops, impacts and vibrations Supports 2.5 mm and 1.25 mm SFF connectors Over 80 hours of battery life with two AA batteries | Fiber Certification and Testing |
|
|
|
Fluke Networks FT-600 FiberInspector Professional Video Microscope | Dual-magnification probe allows quick changes between 250x and 400x Large 3.5" display provides crisp, clear images of microscopic debris and end-face damage Troubleshooting is 10 times faster than with traditional scopes Various probe adapter tips allow for inspection through many different connector port types Rugged carrying case and protective boot prevent damage Capture and upload images when used in conjunction with the OptiView™ or OptiFiber™ | Fiber Certification and Testing |
|
|
|
Fluke Networks FT525 | 200x magnification probe enables inspection of both multimode and single mode end-faces inside ports and on patch cords Miniature display boasts an exceptionally sharp 1.8" screen Troubleshooting is 10 times faster than with traditional scopes Grip trigger activation extends battery life Various probe adapter tips allow for inspection through many different connector port types | Fiber Certification and Testing |
|
|
|
Fluke Networks FT-500 FiberInspector Mini Video Microscope | 200x magnification probe enables inspection of both multimode and singlemode end-faces inside ports and on patch cords Miniature display boasts an exceptionally sharp 1.8" screen Troubleshooting is 10 times faster than with traditional scopes Grip trigger activation extends battery life Various probe adapter tips allow for inspection through many different connector port types | Fiber Certification and Testing |
|
|
|
Fluke Networks FTK2000 SimpliFiber Pro Singlemode Fiber Verification Kit | Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record Additional 1490 and 1625 nm wavelengths extends product use to broader applications CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at... | Fiber Certification and Testing |
|
|
|
Fluke Networks FTK1450 Complete SimpliFiber Pro Fiber Verification Kit with FiberInspector Mini | Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record Additional 1490 and 1625 nm wavelengths extends product use to broader applications CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at... | Fiber Certification and Testing |
|
|
|
Fluke Networks FTK1350 SimpliFiber Pro Multimode Fiber Verification Kit with FT500 FiberInspector Mini | Dual-wavelength testing Tests multimode and singlemode fiber Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source; calibrated wavelengths in the power meter at 1490 nm and 1625 nm also allow for readings from other sources Offers quick remote identification of cabling runs with FindFiber Remote IDs Conduct pre-testing and qualify cabling runs Auto-senses source... | Fiber Certification and Testing |
|
|
|
Fluke Networks FTK1300 SimpliFiber Pro Multimode Fiber Verification Kit | Dual-wavelength testing Tests multimode and singlemode fiber Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source; calibrated wavelengths in the power meter at 1490 nm and 1625 nm also allow for readings from other sources Offers quick remote identification of cabling runs with FindFiber Remote IDs Conduct pre-testing and qualify cabling runs Auto-senses source... | Fiber Certification and Testing |
|
|
|
Fluke Networks FTK1000 SimpliFiber Pro Basic Fiber Verification Kit | Dual-wavelength testing Tests multimode and singlemode fiber Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source; calibrated wavelengths in the power meter at 1490 nm and 1625 nm also allow for readings from other sources Offers quick remote identification of cabling runs with FindFiber Remote IDs Conduct pre-testing and qualify cabling runs Auto-senses source... | Fiber Certification and Testing |
|
|
|
Fluke DTX-1800 DTX CableAnalyzer™ Series Digital Cable Analyzer | DTX significantly reduces total certification costs up to 33% a year Three times faster than existing testers with 9-second Cat 6 Autotest Independently verified by UL to meet ISO Level IV and proposed TIA Level IIIe Accuracy requirements Analyze test results and create professional test reports using LinkWare reporting software Verify the availability of network and IP services using the Network Service Module Perform Basic fiber certification five times faster with DTX Fiber... | Fiber Certification and Testing |
|
|
|
Fluke Networks OFP-100 Series: Multimode & Singlemode Optifiber Pro OTDR Kit (OFP-100-M, OFP-100-S, and OFP-100-Q) | First OTDR with a smartphone user-interface Industry's shortest event and attenuation dead zones Improve resource utilization with custom configurations for projects and users Accelerate fiber certification with trace times as short as two seconds in Quick Test mode Maximize efficiency with a smartphone user interface that allows anyone to perform expert fiber troubleshooting and certification Quickly test datacenter fiber with pre-programmed settings Troubleshoot datacenter fiber links... | Fiber Certification and Testing |
|
|
|
Fluke Networks OFP-CFP-QI OptiFiber Pro and CertiFiber Pro Quad Kit with Inspection | Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors. Fastest time to certify – two fibers at two wavelengths in three seconds. Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... | Fiber Certification and Testing |
|
|
|
Fluke Networks OFP-CFP-SI OptiFiber Pro and CertiFiber Pro Singlemode Kit with Inspection | Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors. Fastest time to certify – two fibers at two wavelengths in three seconds. Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... | Fiber Certification and Testing |
|
|
|
Fluke Networks OFP-CFP-MI OptiFiber Pro and CertiFiber Multimode Kit with Inspection | Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors. Fastest time to certify – two fibers at two wavelengths in three seconds. Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... | Fiber Certification and Testing |
|
|
|
Fluke Networks CFP-100-Q CertiFiber Pro Quad OLTS Kit (LC Style) | Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors. Fastest time to certify – two fibers at two wavelengths in three seconds. Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... | Fiber Certification and Testing |
|
|
|
Fluke Networks CFP-100-S CertiFiber Pro Singlemode OLTS Kit (LC Style) | Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors. Fastest time to certify – two fibers at two wavelengths in three seconds. Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... | Fiber Certification and Testing |
|
|
|
Fluke Networks CFP-100-M CertiFiber Pro Multimode OLTS Kit | Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors. Fastest time to certify – two fibers at two wavelengths in three seconds. Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... | Fiber Certification and Testing |
|
|
|
Fluke Networks Pro3000 Analog Tone and Probe | Tone and trace wire on non-active networks SmartTone™ technology provides five distinct tones for exact pair identification Sends loud tone up to 10 miles (16 kilometers) on most cables Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures Angled bed-of-nails clips allow easy access to individual pairs RJ11 connector is ideal for use on telephone jacks Attach nylon pouch (included in kit) to your belt for easy transport | Copper Cable Test Solutions |
|