|
DKK-TOA PSS/ASS‐304B(KCl replenish-free) / PSS/ASS‐314B(KCl refillable)
|
|
Exchangeable Tip ORP Electrode PSS/ASS‐304B(KCl replenish-free) / PSS/ASS‐314B(KCl refillable)
asy-to-replace electrode tip and reference electrode junction tip
Platinum electrodes (PSS) and gold electrodes (ASS) available
KCl non-refillable type is ideal for wastewater treatment; KCl refillable type for processes
Selection of electrode holder: immersion type, drop-in type and flow-through type
Meas. range
ORP: -2000 - +2000 mV |
Exchangeable Tip pH Electrode
|
|
|
DKK-TOA SCU-02
|
|
Adopts environmental friendly Freon replacement gas
Automatic temperature adjustment
Safety apparatus equipped such as overload relay and current overload breaker
Explosion-proof TIIS ExpdⅡBT4 certified
|
Explosion-Proof Type Cooler
|
|
|
DKK-TOA FPA
|
|
Designed for oil refinery
Batch continuous analysis of flash point of petroleum products such as light gas oil, kerosene and gasoline
Best suited for management of plant and product control
Explosion-proof TIIS d2G4 certified
Meas. range
0 - 100 degrees C
|
Flash Point Analyzer
|
|
|
DKK-TOA HC-8Series
|
|
Designed for pH/ORP measurements in closed loop lines and environments where process pressure exists, such as pipes or sealed tanks and etc.
Assemble electrodes available: 5610(KCl refillable type); 5910(KCl replenish-free type)
|
Flow-Through Type pH/ORP Detector
|
|
|
DKK-TOA HYM-300
|
|
Continuous measurement of hydrazine concentration in boiler water
Stabilization determination function during calibration
Best suited for monitoring of residual hydrazine concentration
Meas. range
0 - 999.9 μg/L
|
Hydrazine Transmitter
|
|
|
DKK-TOA HC-7 Series
|
|
Ideal for pH/ORP measurements in tanks and open water applications
Assemble electrodes available: 5600 (KCl refillable type); 5910 (KCl replenish-free type)
Mounting flanges for tanks available (50A, 100A, 150A)
|
Immersion Type pH/ORP Detector
|
|
|
DKK-TOA LHC-7D
|
|
Electrode Holder with Lift Up Type Jet Cleaner LHC-7D
A detector which can lift up from the sample water and remove fouling from the pH/ORP electrode effectively.
Automatic cleaning system that applies alternate streams of wash water and chemical solution (such as a 5% hydrochloric acid solution) to clean the pH/ORP detector.
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA UHC-7C / UHC-8C
|
|
Flow-Through Type Detector with Ultrasonic Cleaner UHC-7C / UHC-8C
Detectors composed of holder and ultrasonic cleaner: Immersion type (UHC-7C) and flow-through type (UHC-8C)
One-touch detachable holder enables quick calibration and easy maintenance
Compatible with GSS series
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA JHC-7C/JHC-8C
|
|
Immersion Type Detector with Water Jet Cleaner JHC-7C/JHC-8C
Detectors composed of holder and water-jet cleaner: Immersion type(JHC-7C) and flow-through type(JHC-8C)
By spraying water onto the tip of electrode, the water pressure washes fouling away
One-touch detachable holder and easy maintenance
Simple installation with a sensor, timer&electromagnetic valve integrated unit
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA BHC-7C
|
|
Immersion Type pH/ORP Detector with Brush Cleaner BHC-7C
Immersion type pH/ORP electrode holder with cleaning brush (BHC-7C)
The swing movements wash the electrode tip and prevent it from fouling
One-touch detachable holder and easy maintenance
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA RHC-7C / RHC-7EC
|
|
Immersion Type Detector with Chemical Cleaner RHC-7C / RHC-7EC
Immersion type electrode holder combined with chemical cleaning system
By spraying mixed air&cleaning agents onto the electrode tip it dissolves fouling away
|
Immersion Type pH/ORP Detector with Some Cleaners
|
|
|
DKK-TOA OC-711 / OC-950
|
|
Immersion/Drop-In Type DO Holder OC-711 / OC-950
Lightweight PVC holder; length of immersion type holder: 0.3 - 3.5 m, length of stainless steel protection pipe for drop-in type holder: 2 - 6 m
Electrode: polarograph type 7533L (for standard use) or 7536L (for human waste)
|
Immersion/Drop-in Type DO Holder/Detector with Water Jet Cleaner
|
|
|
DKK-TOA JOC-711C / JOC-950C
|
|
Detector with Water Jet Cleaner JOC-711C / JOC-950C
Cleaning electrode contamination by jetting water or air onto the electrode
Immersion type (JOC-711C) and drop-in type (JOC-950C)
Electrode: polarograph type 7533L (for standard use) or 7536L (for human waste)
|
Immersion/Drop-in Type DO Holder/Detector with Water Jet Cleaner
|
|
|
DKK-TOA A5/A6 Series
|
|
Hermetically sealed 2-electrode type detector featured with excellent heat-proofing and pressure tightness
Pipeline-insertion/immersion/flow-through/throw-in/leadless, etc. type available
Four types of cell constants available: 0.01, 0.1, 1.0, 10 cm-1
Meas. range
Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm
|
Industrial Conductivity Detector
|
|
|
DKK-TOA AR4/AR5 Series
|
|
Compact 2-electrode type (titanium) detector designed for ultrapure water
Pipeline insertion type, leadless type
Two types of cell constants available: 0.01, 0.1 cm-1
Meas. range
0 - 20/200 MΩ·cm 0 - 0.2/2 μS/cm
|
Industrial Conductivity Detector
|
|
|
DKK-TOA SOD-35D (2-Wire Transmitter) SOC-71 (Sensor)
|
|
Polarograph type DO analyzer with intrinsically safe explosion-proof function (combined with a Zener Barrier)
Alterable output range
Types of detectors available: immersion, flow-through and fermentation-used (electrodes: ELD-017/ELD-019)
Meas. range
Minimum : 0 - 1 mg/L Maximum: 0 - 20 mg/L
|
Intrinsically Safe Explosion-Proof Type DO Transmitter
|
|
|
DKK-TOA SHBM-161 / 163 (2-wire)
|
|
Compact diecast aluminum enclosure
ExiallCT4 (combined with a Zener Barrier) explosion-proof and IP65 conformed enclosure
Easy calibration done with standard solution
Auto-detection of electrodes deterioration
Alterable output range
Meas. range
SHBM-161: pH; -1 - 15 SHBM-163: ORP; -2000 - +2000 mV
|
Intrinsically Safe Explosion-Proof Type Transmitter for Industrial pH/ORP Analyzer
|
|
|
DKK-TOA HBM-100A / HBM-102A
|
|
Compact DIN 96 size design
Auto-detection of electrode deterioration
Automated self-diagnosis of fault (burn-out output)
Alterable alarm contact signal (4-point)
2-channel output (RS-232 optional)
Meas. range:
HBM-100A: pH; -1 - 15 HBM-102A: ORP; -2000 - +2000 mV |
Panel Mount pH/ORP Analyaer
|
|
|
DKK-TOA WBM-100
|
|
Compact DIN 96 size
Temperature compensation computed by a microcomputer
Cell constant value adjustable depends on customers' need
Water temperature displayable
Power supply: AC90 - 264V, 50/60Hz
Meas. range
Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm
|
Panel Type Conductivity Analyzer
|
|
|
DKK-TOA WBM-210A
|
|
Compact DIN 96 size
Conductivity meter with built-in microcomputer for various applications such as ultra-pure water production, boiler plants, foodstuff plants, etc.
Two detectors connectable
RS-232 equipped as standard specification
Output: 2-channel, insulated, 4 - 20mA
Meas. range
Minimum : 0 - 0.2 μS/cm Maximum: 0 - 20 mS/cm
|
Panel Type Conductivity Analyzer
|
|