|
Sew 2803 IN (Ranges: 0.5kV, 1kV, 2.5kV, 5kV)
|
|
FEATURES
● Microprocessor-controlled.● Four insulation test voltages.● Insulation resistance; auto ranging on all ranges.● Bargraph indicates test voltage; rise and decay can be observed during tests.● Visual and audible warning if external voltage is present.● EnerSave™ feature to extend battery life.● 2 Lines × 16 characters large LCD.● Low battery consumption.● Low battery indicator.● Overload protection.● Auto-off.● Show test time... |
Digital (1kV up) H.V. Insulation Testers
|
|
|
TEN880D-TM-188D HEAT STRESS WBGT METER WITH TEMP/RH/DEW POINT
|
|
- Dataloggin, Quick-response capacitance sensor, accurate measurement for wet bulb globe temperature(WBGT), black globe temperature(TG), humidity(%RH), air temperature(TA), wet bulb(WET) and dew point(DEW). - Max/Min and data hold. - Low battery indication. - LCD display with LED backlight. - Viewing data records. - Switch the temperature unit to ℃ or ℉. - Brass black ball in 50mm diameter. - WBGT alarm setting. - Auto power off with disable function. - Data logging capacity: 12000... |
Portable humidity meters
|
|
|
Testo 405 (0560 4053) Thermal Anemometer w/ Telescopic Velocity stick
|
|
Volume flow calculation up to 99,990 m3/h
Temperature measurement
Ideal for measurements in ducts
Easily read data at any angle with rotating display
Telescopic handle to 300 mm
Cap rotates to protect sensor against moisture and dirt, 118 in long telescopic handle
|
Anemometers
|
|
|
Sew 1151 IN-M
|
|
FEATURES
● High Contrast OLED display.● Designed for viewing in the dark, for mining industry.● Auto-range microprocessor-controlled.● Automatic voltmeter AC/DC at Start/Reset.● Battery test at switch ON/Reset.● Safety voltmeter before each test.● Auto-discharge on all tests and all ranges.● Leads auto-null key.● Test auto-stop.● Smart hold and stop on voltmeter AC/DC.● Ener-Save.● Continuity short circuit >220mA.● Continuity open circuit voltage of... |
Insulation & Multifunction Testers (OLED Display)
|
|
|
Chauvin F401 Clampmeter
|
|
AC/DC TRMS Clampmeter
All the basics for mains powered installations and equipment
For medium and high-power work, the F400 Series provide maximum safety whatever the measurement conditions and type of installation.
Chauvin Part No: P01120941
|
AC/DC Clampmeter
|
|
|
Fluke Networks CFP-100-M CertiFiber Pro Multimode OLTS Kit
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
DKK-TOA CM-30R
|
|
JP16 (The Japanese Pharmacopoeia 16th edition) conformity and stable electric conductivity measurement
Built-in pure water temperature compensation
USB (Host) and LAN equipped as standard specification
Compliant with USP<645> requirements
Meas. range
0 - 200.0 S/m 0 - 20.00 MΩ・m Chloride 0 - 4.00% Concentration 0 - 200% 0 - 100.0 degrees C |
Conductivity Meter
|
|
|
DKK-TOA HBM-100A / HBM-102A
|
|
Compact DIN 96 size design
Auto-detection of electrode deterioration
Automated self-diagnosis of fault (burn-out output)
Alterable alarm contact signal (4-point)
2-channel output (RS-232 optional)
Meas. range:
HBM-100A: pH; -1 - 15 HBM-102A: ORP; -2000 - +2000 mV |
Panel Mount pH/ORP Analyaer
|
|
|
YOKOGAWA DL850E/DL850EV SCOPECORDER
|
|
Measure and analyze a wealth of signals in real-time and speed up development and fault finding.
The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days. Using flexible modular inputs it combines measurements of electrical signals, physical (sensors) and CAN / LIN serial buses and is able to trigger on electrical power related and other calculations in real-time.
Localized language... |
SCOPECORDERS
|
|
|
GW INSTEK LCR-8000G Series
|
|
Features:
※ Wide Test Frequency 20Hz ~ 10/5/1MHz ※ 0.1% Basic Accuracy & 6 Digits Measurement Resolution ※ Large LCD Display with Intuitive Interface※ Full Measuring Functions with DUT V/I Monitor※ PASS/FAIL Function ( abs, % or delta) with Judgment Alarm※ DC Resistance Measurement ※ Multiple Step Mode※ Standard RS-232C/GPIB Interface※ Optional DC Bias box |
LCR Meters
|
|
|
DKK-TOA WM-32EP
|
|
2-channel type, simultaneous measurement and display of pH/conductivity
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
PC and external printer connectable
Measurement items
pH, ORP, conductivity, resistivity, salinity, temperature (ORP electrodes sold separately) |
Handheld Electrical Conductivity/pH Meter
|
|
|
Sew 6237 DLRO
|
|
FEATURES
● Microprocessor-controlled.● Measure down to 1μΩ.● 6 ranges from 2.000mΩ to 200.0Ω.● Maximum resolution of 1μΩ.● Three test currents with over-temperature protection.● Four terminal measurement.● Protection against inadvertent connection to over- voltage. (crow bars for current and voltage)● Clear & large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave™ Inside.● EnerSave™... |
Low Resistance Ohm Meter
|
|
|
Sew 162 CB
|
|
FEATURES
Filter Probe
● Works with any Tone Generator to identify wires.● Volume control for increasing sensitivity and adjustable to suit work environment.● 2 operation modes: Filter on / Filter off.● The auto-off function (5 minutes) prevents battery consumption.● Power supply is available in any 9V battery with a life of approximately 50 hours.● A phone jack is designed for headset or handset.●... |
Cable Tracers
|
|
|
Sew 1826 NA
|
|
FEATURES
● Microprocessor-controlled.● Measures Earth Resistance without the need for poles in the ground or external measuring wires.● Earth measurement uses the real earth current path and the current generated by the electric network, without the need for any disconnection.● The Earth Resistance displayed is exactly the earth resistance that the earth current will need to... |
Electrical Network Analyzers
|
|
|
BW Sensepoint XCD
|
|
The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, nonintrusive operation and reduces routine maintenance time and costs. Sensepoint XCD ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous... |
Fix type gas detector
|
|
|
LUTRON LM-8000A 4 in 1, Anemometer + Humidity meter + Light meter + Thermometer
|
|
Description: Anemometer, Humidity meter Light Meter, Type K Thermometer Model : LM-8000A* Humidity : 10 to 95 %RH,oC/oF * Anemometer : 0.4 to 30.0 m/s. * Anemometer unit : m/s, km/h, MPH, knots, ft/min, oC/oF. * Light : 0 to 20,000 Lux, 0 to 1,680 Ft-cd, auto range. * Type K Thermometer : -100 to 1300 oC, oC/oF. * Data hold, Record (Max., Min.) * Tiny bone shape with light weight and small size. |
LM-8000 SERIES
|
|
|
Seaward Supernova Elite PATSolutions Kit
|
|
Advanced dual voltage PAT testing kit
SUPERNOVA ELITE - A COMPREHENSIVE, DUAL VOLTAGE PAT WITH FLASH TEST
As well as flash and RCD trip time tests, the Supernova Elite also has full dual voltage capability.
Seaward Part No: 323A910
|
PAT Testing Kits
|
|
|
Sew ST-850
|
|
FEATURES
● Two functions in one unit: open phase and phase sequence detection.● Lamps let you determine at-a-glance if phase is open.● Large size alligator clips for easy clipping onto switch-boards terminals.● Checks a wide range of 3-phase power sources.● Special test leads length are available on request.● Push button switch is designed to minimize damage due to negligence.
SPECIFICATIONS
... |
Phase Sequence Indicators (Contact Type)
|
|
|
FLIR i7 Infrared Camera
|
|
140 x 140 px Thermal Camera
THE FLIR i7 IS IDEAL FOR ELECTRICAL INSPECTIONS, ENERGY AUDITS, WEATHERISATION JOBS AND BUILDING INSPECTIONS
Most FLIR products on this site are advertised at the list price. Please use the 'Best Quote' link on the right for our discounted price.
FLIR Part No: 60101-0301
|
FLIR i-Series Thermal Imagers
|
|
|
GW INSTEK ADP-001
|
|
Features:
* 50 ohms, BNC(J/F) - N(P/M)* For : GSP-Series |
Adaptors
|
|