By Brands

Megger Net200 MTDR Network Qualifier

Category: Megger
  • Evaluate the capability of link connections and locate faults up to 500 meters
  • Detect Wiremap failure (Pass/Fail)
  • RJ45 and BNC connectors
  • 10BASE-T and 100BASE-TX Ethernet, half- or full- duplex support
  • 1000BASE-T, Auto measurement of signal performance, wiremap and length
  • 1 kHz analogue tone signal output suitable for all probe sets
    The Megger NET200 is an all-in-one and easy-to-use network testing unit measuring logical network performance and the physical condition of network cables. The Megger NET200 is the tool of choice, allowing engineers to install and efficiently maintain local area network (LAN) with 10BASE-T and/or 100BASE-TX based Ethernet protocol. It provides round-trip time (RTT) testing to measure network speed under dynamic and static configuration protocols and IP scanning to show the information on all terminals connected with the local network. It can also evaluate the capability of link connections such as supported network speed (10BASE-T or 100BASE-TX) and duplexity (half- or full- duplex).

    The Megger NET200 1002-856 provides physical information for the LAN cable under tests such as cable length, faulty positions (open or short) and Wiremap (Pass/Fail). With the novel high-resolution graphic TDR (Time-Domain Reflectometer) and TDX (Time-Domain Crosstalk), it is possible for the user to locate faulty positions along cables up to 500 meters in length. The TDR and TDX can also be used with other types of cable, such as coaxial cables for cable TV and HFC networks and telephony cables.

    The NET200 is supplied as a kit comprising a complete set of testing cables and adapters, and has one of the largest selection of functions available in its class. This makes the NET200 one of the best feature to value instruments on the market today.

    Specifications
    Tone generation 1 kHz analogue tone signal output
    Display 2.5” (128 x 64) mono graphic LCD
    Storage Slots 100 ea (automatic test output), over 20 ea (TDR waveform)
    External interface USB (provided USB-only cable )
    Power 11.1 V (Li-Ion, 1800 mAh)
    15 V/1 A AC-DC adapter
    Operating time 6 hours
    Recharge time 4 hours
    Operating temperature 15 ºC - +55 ºC
    Storage temperature -20 ºC - +70 ºC
    Humidity 95%
    Wiremap Pass/Fail
    Crosstalk Crosstalk test per 10 base-T, 100 base-TX, 1000 base-T
    Impedance Graphic display for an approximate impedance
    Continuity Measurement of continuity lines
     
           
           
    Included Accessories
     
    • 1 - AC-DC Power adapter
    • 1 - BNC to F-connector
    • 1 - RS232 to USB adapter cable
    • 1 - DC Car charge lead
    • 1 - Portable bag
    • 1 - Pouch
    • 3 - Power cords (US, EU, UK)
    • 1 - Remote identifier #1
    • 1 - Test Lead Cable
    • 1 - User Manual
    • 1 - PC Emulation Software CD
    Included

Location

Ask about this product