|
YOKOGAWA PRECISION POWER SCOPE PX8000
|
|
Traditional power measurement instruments cannot provide accurate time measurements; oscilloscopes are not designed to measure power. The PX8000 is the world's first precision power scope, bringing oscilloscope-style time-based measurement to the world of power measurement. It can capture voltage and current waveforms precisely, opening up applications and solutions for a huge variety of emerging power measurement problems.
Localized language brochures are available below in the... |
DIGITAL POWER ANALYZERS
|
|
|
Sew LS-110 SYNC (120V) LS-110 SYNC (240V)
|
|
FEATURES
● Input Voltage : 120V AC or 240V AC.● Standard 4.5-inch switchboard case.● Front panel mount.● 3 bi-colored LED indicators for "SYNC", "GEN" and "BUS".● 24 LEDs in a circle display the phase angle and the frequency differences between 2 networks.● 360° LED indication.● 12 o'clock position LED is bi-colored.
SPECIFICATIONS
LS-110 SYNC ... |
LED synchroscope
|
|
|
Hioki Chemical Impedance Analyzer IM3590
|
|
Wide band 1mHz to 200kHz Chemical Impedance Analyzer for Testing Electrochemical Components and Materials, Batteries, and EDLC
Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The IM3590 is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing.
This product is... |
LCR | Resistance | Battery Testers
|
|
|
Hioki Leak Current Hitester ST5541
|
|
Leakage Current Testing According to IEC60990, IEC60335, and other Safety Standards
To ensure the safe use of electrical products, electrical safety tests such as insulation resistance, withstand voltage, ground resistance, and leakage current must always be conducted. Hioki Leakage Current Testers comply with laws and standards regarding medical electrical equipment as well as non-medical electrical equipment, and can be used to measure leakage current in all types of electrical products from... |
Leakage Current | Insulation | Withstand Voltage (HiPot) Testers
|
|
|
Hioki Power Hitester 3193-10
|
|
DC, 0.5 Hz To 1 MHz, 6-Channel 3-Phase 4-Wire Power Meter with Direct and Clamp Sensor Input
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3193-10 is a 6-channel power meter for testing any type of circuit ranging from single-phase lines to three-phase four-wire lines. Based on the voltage, current, and active power measurements, the power meter calculates... |
Power Meters | Power Analyzers | Clamp On Power Meters
|
|
|
LUTRON MS-7011 HUMIDITY CONTENT METER, + type K Temp.
|
|
|
YK SERIES
|
|
|
Hioki Safety HiTester 3258
|
|
World’s First Non-Metallic Contact Voltage Tester Measures 600V With Optimal Safety
Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3258 is a line voltage tester that employs a coupling capacitance cancellation method to measure voltage in AC circuits without requiring metal-to-metal contact. Voltage can be measured safely at practically any location, on either insulated or exposed metal conductors. |
Digital Multimeters (DMM) | Handheld Testers
|
|
|
YOKOGAWA MIXED SIGNAL OSCILLOSCOPES DLM4000
|
|
The DLM4000 is a unique to the industry eight-channel mixed-signal oscilloscope suitable to test and debugging applications in the embedded systems, power electronics, mechatronics, and automotive sectors. Available in both 350 MHz and 500 MHz models, the 2.5 GSa/sec DLM4000 features eight analog input channels. The eighth input channel features Flex MSO which converts to a 8-bit logic analyzer at the push of a button; add sixteen additional logic analyzer inputs as an option, for 24-bit logic... |
MIXED SIGNAL OSCILLOSCOPES
|
|
|
Lutron 50A/50mV SHUNT - ST-50
|
|
|
Adapter Series
|
|
|
Hioki Bare Board HiTester 1231-11
|
|
Semiconductor Package Board Testing System Utilizing Index Table Method
The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards. |
Bare Board Testing
|
|
|
LUTRON AM-4203HA ANEMOMETER
|
|
Description: ANEMOMETER Model : AM-4203HA * -P circuit, 0.4 to 25.0 m/s. * Max., Min., Memory recall button. * m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF). * Size : 185 x 78 x 38 mm. |
HA SERIES
|
|
|
TES-1500 Capacitance Meter
|
|
0.5% Accuracy.
Overload Fuse protection.
Test Clips/Direct insert jack for easy measurement.
|
Multimeter
|
|
|
DKK-TOA FPM-377
|
|
PM2.5 Monitor FPM-377
Environment Ministry (JAPAN) Approval
Beta ray attenuation method (mass concentration)
Heater type dehumidifier
VSC cyclone (USEPA approval)
Outdoor type and indoor type available
Meas. range
0 - 500, 0 - 1000, 0 - 5000 μg/m3
|
Particulate Monitor
|
|
|
DKK-TOA NPW-160
|
|
Automated Total Nitrogen/Phosphorus/COD Analyzer NPW-160
Measuring based on official measuring method
Multiple-wavelength detector enables measurement of total nitrogen, total phosphorus and COD simultaneously
Space-saving design attained by eliminating back piping
Drip-proof construction
Meas. range
Total nitrogen: 0 - 2 mg/L to 50 mg/L Total phosphorus: 0 - 0.5mg/L to 20 mg/L COD (UV method): 0 - 2 Abs
|
Automatic Total Nitrogen/Phosphorus/COD Analyzer
|
|
|
3B5700
|
|
150°C ½ AA High Temperature Battery |
Data Logger Batteries
|
|
|
DKK-TOA BPM-2000
|
|
Designed for oil refinery
Automatic fractional distillate analyzer of batch distillation type enables distillation test of petroleum products such as kerosene, diesel oil, gasoline and etc.
Adopts high resolution liquid level detecting sensor
Newly-developed FA computer embedded with large-sized, color touch panel
Explosion-proof TIIS fd2G4 certified
Meas. range
Standard:Light gas oil (0 - 400 degrees C), Kerosene (0 - 300 degrees C), Gasoline (0 - 200degrees C)
|
Boiling Point Analyzer
|
|
|
Sew 4136 mO
|
|
FEATURES
● Microprocessor-controlled.● Four terminal measurement.● Measures down to 100μΩ.● 5 Ranges from 200.0mΩ to 2000Ω.● Maximum resolution of 100μΩ.● Three test currents with over-temperature protection.● Protection against inadvertent connection to over voltage.● Large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave inside.● EnerSave Auto hold.● EnerSave Auto off.● Lightweight, robust &... |
Milliohm Meters
|
|
|
Sew ST-360TRn
|
|
FEATURES
● Easy to read 3-color scale...for mistake proof reading.● Mirror scale...makes reading pointer easy.● Fuse protection function.● Safety fused...on all ranges.● Diode protected meter...prevents damage due to overload.● hFE and db measurement.● With stand...makes reading and measuring easy.
SPECIFICATIONS
DC volts
0-0.1 / 0.5 / 2.5 / 10 / 50 / 250 /... |
Analogue Multimeters
|
|
|
BANTE PHscan10S Pocket pH Tester
|
|
PHscan10S pocket pH tester is equipped with a standard pH
electrode (Round glass bulb) that used to measure the pH of
non-viscous, non-high temperature liquids, e.g., wastewater,
tap water, drinking water, rainwater, etc.
Features:
2 points push-button calibration with auto-buffer recognition.
Hold function freezes the current displayed value for easy viewing.
Auto-power off feature helps you effectively conserve battery... |
pH Meters
|
|
|
Sew 2734 ER
|
|
● Microprocesser-controlled with advanced safety features.● 4-wire testing only.● Automatic C spike check.● Auto power-off.● Auto data hold.● Large LCD (2000 counts).● Protective terminal cover.
SPECIFICATIONS
Measuring ranges
Earth Resistance 0-20Ω / 0-200Ω / 0-2000Ω Earth Voltage 0-200V AC
Accuracy
Earth Resistance ±2%rdg±3dgt Earth... |
4 Wire Earth Resistance Testers
|
|