|
Hioki Chemical Impedance Analyzer IM3590
|
|
Wide band 1mHz to 200kHz Chemical Impedance Analyzer for Testing Electrochemical Components and Materials, Batteries, and EDLC
Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The IM3590 is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing.
This product is... |
LCR | Resistance | Battery Testers
|
|
|
Hioki Leak Current Hitester ST5541
|
|
Leakage Current Testing According to IEC60990, IEC60335, and other Safety Standards
To ensure the safe use of electrical products, electrical safety tests such as insulation resistance, withstand voltage, ground resistance, and leakage current must always be conducted. Hioki Leakage Current Testers comply with laws and standards regarding medical electrical equipment as well as non-medical electrical equipment, and can be used to measure leakage current in all types of electrical products from... |
Leakage Current | Insulation | Withstand Voltage (HiPot) Testers
|
|
|
Hioki Power Hitester 3193-10
|
|
DC, 0.5 Hz To 1 MHz, 6-Channel 3-Phase 4-Wire Power Meter with Direct and Clamp Sensor Input
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3193-10 is a 6-channel power meter for testing any type of circuit ranging from single-phase lines to three-phase four-wire lines. Based on the voltage, current, and active power measurements, the power meter calculates... |
Power Meters | Power Analyzers | Clamp On Power Meters
|
|
|
LUTRON MS-7011 HUMIDITY CONTENT METER, + type K Temp.
|
|
|
YK SERIES
|
|
|
Hioki Safety HiTester 3258
|
|
World’s First Non-Metallic Contact Voltage Tester Measures 600V With Optimal Safety
Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3258 is a line voltage tester that employs a coupling capacitance cancellation method to measure voltage in AC circuits without requiring metal-to-metal contact. Voltage can be measured safely at practically any location, on either insulated or exposed metal conductors. |
Digital Multimeters (DMM) | Handheld Testers
|
|
|
YOKOGAWA MIXED SIGNAL OSCILLOSCOPES DLM4000
|
|
The DLM4000 is a unique to the industry eight-channel mixed-signal oscilloscope suitable to test and debugging applications in the embedded systems, power electronics, mechatronics, and automotive sectors. Available in both 350 MHz and 500 MHz models, the 2.5 GSa/sec DLM4000 features eight analog input channels. The eighth input channel features Flex MSO which converts to a 8-bit logic analyzer at the push of a button; add sixteen additional logic analyzer inputs as an option, for 24-bit logic... |
MIXED SIGNAL OSCILLOSCOPES
|
|
|
Lutron 50A/50mV SHUNT - ST-50
|
|
|
Adapter Series
|
|
|
Hioki Bare Board HiTester 1231-11
|
|
Semiconductor Package Board Testing System Utilizing Index Table Method
The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards. |
Bare Board Testing
|
|
|
LUTRON AM-4203HA ANEMOMETER
|
|
Description: ANEMOMETER Model : AM-4203HA * -P circuit, 0.4 to 25.0 m/s. * Max., Min., Memory recall button. * m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF). * Size : 185 x 78 x 38 mm. |
HA SERIES
|
|
|
TES-1500 Capacitance Meter
|
|
0.5% Accuracy.
Overload Fuse protection.
Test Clips/Direct insert jack for easy measurement.
|
Multimeter
|
|
|
DKK-TOA FPM-377
|
|
PM2.5 Monitor FPM-377
Environment Ministry (JAPAN) Approval
Beta ray attenuation method (mass concentration)
Heater type dehumidifier
VSC cyclone (USEPA approval)
Outdoor type and indoor type available
Meas. range
0 - 500, 0 - 1000, 0 - 5000 μg/m3
|
Particulate Monitor
|
|
|
DKK-TOA NPW-160
|
|
Automated Total Nitrogen/Phosphorus/COD Analyzer NPW-160
Measuring based on official measuring method
Multiple-wavelength detector enables measurement of total nitrogen, total phosphorus and COD simultaneously
Space-saving design attained by eliminating back piping
Drip-proof construction
Meas. range
Total nitrogen: 0 - 2 mg/L to 50 mg/L Total phosphorus: 0 - 0.5mg/L to 20 mg/L COD (UV method): 0 - 2 Abs
|
Automatic Total Nitrogen/Phosphorus/COD Analyzer
|
|
|
GW INSTEK PCS-1000
|
|
Features
- 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB |
Precision Current Shunt Meter
|
|
|
Kyoritsu 2012R
|
|
Kyoritsu 2012R
Innovative Multhimeters with current measurements up to 120A AC/DC
•
Unique Open Jaw technology for AC/DC current measurements
•
Very compact and as reliable as a tradictional full size multimeter
|
Digital Multimeter with AC/DC Clamp Sensor
|
|
|
Hioki Memory Hicorder MR8847 Series
|
|
MEMORY HiCORDER MR8847 Series
High-speed 20MS/s Multi-channel Memory Recorder Provides Simultaneous Data Acquisition During Field Testing with Rugged Portability and Built-in Printer
Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, vibration, weight, acceleration and rotation due to complete isolation between channels and from each channel to the ground. More than... |
Memory Recorders | Oscilloscopes | Data Acquisition
|
|
|
NIC0008-CM-8826FN DIGITAL PAINT COATING THICKNESS GAUGE WITH CABLE
|
|
Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution; 0.1/1 Accuracy: 3%n or 5um |
Paint coating thickness gauges(ultrasonic)
|
|
|
FLIR E8 Thermal Imager
|
|
Entry-Level Thermal Camera
feature rich and extremely affordable thermal imaging camera with FLIR's patented MSX-technology
Designed for entry-level users, and measuring temperatures up to +250°C, the E8 produces instant, ‘point-and-shoot’ JPEG thermal imagery with all required temperature data included.
FLIR Part No: 63903-0303
|
E-Series Thermal Cameras
|
|
|
Seaward PATGuard 3 Elite Subscription
|
|
Health and Safety PAT Software
Compatible with a wide range of portable appliance testers, including Seaward’s Apollo safety management tool
Please note: The purchase of this software is for a subscription period. Licenses are available for 1 year, 3 years or 5 years.
Seaward Part No: PATGuard3
|
Portable Appliance Tester
|
|
|
Chauvin Arnoux C.A6555 15kV Tester
|
|
15 kV Insulation Tester
The CA6555 is ideal for use on rotating equipment and machinery operating at 12 kV or even higher
Main users: electricity companies, manufacturers, installers, maintenance firms, industry, R&D centres and infrastructure.
Chauvin Part No: P01139706
|
HV Insulation Testers
|
|
|
TEN810-Datalogging Large Wall Display Temperature /Humidity Monitor with 95dB Sound Alarm/Controller
|
|
Complete environmental monitor and alarm - Wall-Mounted LED type, easy reading - Alarm set for Hi and Low limit-Temperature and Humidity - Data Logging Capacity 30,000 records - LED displays real time data - USB interface- XL Display: 260 x 178 x 47mm- High Accuracy and high sensitivity
|
Wall-display humidity meters
|
|