|
LUTRON LM-8000A 4 in 1, Anemometer + Humidity meter + Light meter + Thermometer
|
|
Description: Anemometer, Humidity meter Light Meter, Type K Thermometer Model : LM-8000A* Humidity : 10 to 95 %RH,oC/oF * Anemometer : 0.4 to 30.0 m/s. * Anemometer unit : m/s, km/h, MPH, knots, ft/min, oC/oF. * Light : 0 to 20,000 Lux, 0 to 1,680 Ft-cd, auto range. * Type K Thermometer : -100 to 1300 oC, oC/oF. * Data hold, Record (Max., Min.) * Tiny bone shape with light weight and small size. |
LM-8000 SERIES
|
|
|
Fluke BP120MH Rechargeable Ni-Cad Battery Pack
|
|
Nominal Voltage: 4.8V
Capacity: 1800 mAh
|
Batteries, Charges and Adapters
|
|
|
Sew 1151 IN-M
|
|
FEATURES
● High Contrast OLED display.● Designed for viewing in the dark, for mining industry.● Auto-range microprocessor-controlled.● Automatic voltmeter AC/DC at Start/Reset.● Battery test at switch ON/Reset.● Safety voltmeter before each test.● Auto-discharge on all tests and all ranges.● Leads auto-null key.● Test auto-stop.● Smart hold and stop on voltmeter AC/DC.● Ener-Save.● Continuity short circuit >220mA.● Continuity open circuit voltage of... |
Insulation & Multifunction Testers (OLED Display)
|
|
|
Sew 810 EL
|
|
FEATURES
● Wiring check.● Can be used on 2 wires L-E (ELCB/RCCB/GFCI tester).● Can be used on 3 wires L-E-N (with wiring check).● Sense automatically 50 or 60 Hz.● No battery required.● Simple operation.● Current injected in phase with the voltage.● Fused.● Wide operating voltage (195Vac to 265Vac).● Other voltage optional (110V).● Robust.
SPECIFICATIONS
Wiring check... |
Analogue ELCB Testers
|
|
|
Testo 405 (0560 4053) Thermal Anemometer w/ Telescopic Velocity stick
|
|
Volume flow calculation up to 99,990 m3/h
Temperature measurement
Ideal for measurements in ducts
Easily read data at any angle with rotating display
Telescopic handle to 300 mm
Cap rotates to protect sensor against moisture and dirt, 118 in long telescopic handle
|
Anemometers
|
|
|
Sew 6237 DLRO
|
|
FEATURES
● Microprocessor-controlled.● Measure down to 1μΩ.● 6 ranges from 2.000mΩ to 200.0Ω.● Maximum resolution of 1μΩ.● Three test currents with over-temperature protection.● Four terminal measurement.● Protection against inadvertent connection to over- voltage. (crow bars for current and voltage)● Clear & large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave™ Inside.● EnerSave™... |
Low Resistance Ohm Meter
|
|
|
Sew C5F Series
|
|
Material: Nylon● Red and black each (set)● Removable cap for attaching alligator clips● Press can be used with all sew 4mm jack test leads● Rating : EN 61010-031:2002 + A1:2008 CAT IV 1000V 0.5A / CAT IV 690V 2A CAT IV 500V 10A / CAT IV 250V 10A |
Adapter
|
|
|
CM-01 DC/AC Clamp Meter
|
|
High Resolution DC/AC 10mA
23 mm Large Jaw Diameter
One Touch Zero for DCA adjustment
|
DC/AC Current Clamp Meter
|
|
|
Sew 6400 DM
|
|
FEATURES
● 4000 counts LCD with a maximum display of 3999.● Angled display design helps the user to identify the reading of value easier.● Auto ranging designed.● Range change function.● Continuity check.● Diode measurement.● Data hold function.● Low battery indication.● Over range indication.● Fuse protection.● Special hook design used to hang the meter for ease of use.
... |
Digital Multimeters
|
|
|
Fluke Networks ATAP Aggregating In-Line Taps
|
|
Plug-and-play simplicity for fast analysis and deployment
Decrease budget required for visibility on redundant links
Single interface monitoring and analysis for full duplex links
Dual link models are ideal for meshed trunk analysis using single port analysis devices
Media conversion for Gigabit links expands the reach of your existing analysis solutions
Eliminates the need for spanning resources and configurations
|
Taps
|
|
|
Fluke Networks CFP-100-M CertiFiber Pro Multimode OLTS Kit
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
Testo 0554 0004 Silicone Heat Paste
|
|
Improves heat transfer in surface probes
Maximum temperature: 260 ° C
|
Adhesive
|
|
|
Sew ST-2000 A
|
|
Principle : Moving ● Accuracy : ± 0.5% of F.S. ● Scale Length : Approx. 135mm(5-3/8”) ● Weight : Approx. 1.7kg ● Dimension :196(L) x 170(W) x 87(D)mm ● Case Material : Bakelite with glass window |
Portable Instrument
|
|
|
LUTRON CA-08 HARD CARRYING CASE
|
|
Description: HARD CARRYING CASEModel: CA-08* size: 370 x 310 x 115 mm |
NEW PRODUCTS 2010
|
|
|
TWI1001A-HANDHELD FORMALDEHYDE (HCHO/CH20) MONITOR WITH TEMP/RH DISPLAY-FREE SOFTWARE
|
|
This showcased formaldehyde tester comes with a portable design. This portable formaldehyde tester features a large digital screen for easy and convenient reading. This high-quality portable formaldehyde tester is easy to use.
High quality.
Portable design.
|
Formaldehyde meters (HCHO/CH2O)
|
|
|
PH3 Proving unit for use with high voltage indicators with a domed contact electrode
|
|
Proving unit for use with high voltage indicators with a domed contact electrode
High voltage output 1500V DC nominal
Neon indicator to show output is active
Very portable
|
Proving units
|
|
|
Sew 4235 ER
|
|
● Microprocessor-controlled.● Earth resistivity (ρ) test.● Earth testing at 20Ω, 200Ω, 2kΩ.● Earth voltage measuring : 0-300V AC.● Automatic C spike check.● Automatic P spike check.● 2-Wire test, 3-Wire test, 4-Wire test.● LCM display.● Auto ranging.● Auto power OFF.● Data hold.● 200 measurement results can be saved in the memory and recalled on the display.● Interval between auxiliary earth spikes is 1.0~50.0m.
... |
4 Wire Earth Resistance & Resistivity Testers
|
|
|
GW INSTEK APS-1102A
|
|
Features :
- 5.7" Large LCD Display- Output Capacity: 1kVA(for AC 200V Input)- Output Modes: AC and AC+DC Combined with any of four signal sources- Signal Source: Internal(INT),External(EXT),Internal+Externl(ADD)and Sychronization(SYNC)- Arbitrary Waveform Power Output- Power Amplifier of External Signal- Measurement Functions: Voltage, Current, Power ,Frequency, PowerFactor,CF,and Harmonic Current- Capacitor Input Load Supported- Sequence Function Allows Programming of Output Patterns-... |
Programmable AC / DC Power Source
|
|
|
Sew ST-850
|
|
FEATURES
● Two functions in one unit: open phase and phase sequence detection.● Lamps let you determine at-a-glance if phase is open.● Large size alligator clips for easy clipping onto switch-boards terminals.● Checks a wide range of 3-phase power sources.● Special test leads length are available on request.● Push button switch is designed to minimize damage due to negligence.
SPECIFICATIONS
... |
Phase Sequence Indicators (Contact Type)
|
|
|
Sew 162 CB
|
|
FEATURES
Filter Probe
● Works with any Tone Generator to identify wires.● Volume control for increasing sensitivity and adjustable to suit work environment.● 2 operation modes: Filter on / Filter off.● The auto-off function (5 minutes) prevents battery consumption.● Power supply is available in any 9V battery with a life of approximately 50 hours.● A phone jack is designed for headset or handset.●... |
Cable Tracers
|
|