|
Fluke STL120-III Shielded Test Leads
|
|
Length: 1.2m (48”)
Bandwidth: 12,5 MHz
Maximum Signal Voltage: 600V rms. CAT III per IEC 1010-2-031
Maximum Voltage to Ground: 600V rms. CAT III per IEC 1010-2-031
Maximum Current: 1A
|
Test Leads, Probes, Clips
|
|
|
Fluke T5-RLS Replacement Test Lead Set for T5-600 and T5-1000
|
|
Replacement Test Lead Set
For T5-600 and T5-1000 Electrical Testers
|
Test Leads, Probes, Clips
|
|
|
Fluke TL175 TwistGuard Test Leads
|
|
Patented TwistGuard extendable tip shroud that meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
New WearGuard lead wire wear indicator. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement
Double insulated silicone leads. TL175 withstands high temperatures and remains flexible in cold... |
Test Leads, Probes, Clips
|
|
|
Fluke TL175E TwistGuard Test Leads
|
|
Patented TwistGuard extendable tip shroud that meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
New WearGuard lead wire wear indicator. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement
Double insulated silicone leads. TL175 withstands high temperatures and remains flexible in cold... |
Test Leads, Probes, Clips
|
|
|
Fluke TL1550B Test Leads with Alligator Clips (Red, Black, Green)
|
|
3 Test Leads connected to Low-Leakage Probes (red, black, green)
3 Alligator Clips (red, black, green)
Maximum Jaw Opening: 26 mm (1 in.)
Replacement Test Lead Set for the Fluke 1550B MegOhmMeter
Length (Lead Only): 2.6 m (8.6 feet)
Cat II 1000 V, Cat III 600 V, 5kV DC Max (Probes)
Cat II 1000 V, Cat III 600 V, 20 amps (Alligator Clips)
|
Test Leads, Probes, Clips
|
|
|
Fluke TL1550EXT Extended Test Lead Set
|
|
Test Leads connected to Low-Leakage Probes(red, black, green)
3 Alligator Clips (red, black, green)
Maximum Jaw Opening: 26 mm (1in)
Replacement Test Lead Set for the Fluke 1550B/1550C/1555 MegOhmMeter
Cat II 1000 V, Cat III 600 V, 5kV DC Max (Probes)
Cat II 1000 V, Cat III 600 V, 20 amps (Alligator Clips)
Test Leads extend to 25ft!
|
Test Leads, Probes, Clips
|
|
|
Fluke TL222 SureGrip™ Silicone Insulated Test Leads
|
|
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on both ends
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty
|
Test Leads, Probes, Clips
|
|
|
Fluke TL224 SureGrip™ Insulated Test Lead Set
|
|
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on one end and straight connector on the other Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty
|
Test Leads, Probes, Clips
|
|
|
Fluke TL2x4W-PT II 2X4-Wire Ohms Test Lead
|
|
Perform 4-wire measurements with only two test leads
Two conductors per lead (one source and one measure)
Excellent resolution and accuracy
|
Test Leads, Probes, Clips
|
|
|
Fluke TL2x4W-PT 7 2X4-Wire Ohms Test Lead
|
|
Perform 4-wire measurements with only two test leads
Two conductors per lead (one source and one measure)
Excellent resolution and accuracy
|
Test Leads, Probes, Clips
|
|
|
Fluke TL2X4W-TWZ 2X4-Wire Ohms Tweezers Test Leads
|
|
Uses traditional 4-wire method
Tweezer shape Eliminates the resistance of the test leads
Wire tweezers able to probe onto even the smallest of surface mount components
|
Test Leads, Probes, Clips
|
|
|
Fluke TL910 Electronic Test Probes
|
|
Very small 1 mm tips to access hard to reach test points
Probe tip length up to 100 mm, test lead length: 1 m
CAT II 1000 V, 3 A rating
One year warranty
|
Test Leads, Probes, Clips
|
|
|
Fluke TL930 Patch Cords (60 cm)
|
|
1 pair (red, black) multi-stacking 4 mm banana plug patch cords
Nickel-plated banana plugs
61 cm long PVC insulated leads
30 V rms or 60 V DC, 15 A
One year warranty
|
Test Leads, Probes, Clips
|
|
|
Fluke TL932 Patch Cords (90 cm)
|
|
1 pair (red, black) multi-stacking 4 mm banana plug patch cords
Nickel-plated banana plugs
90 cm long PVC insulated leads
30 V rms or 60 V DC, 15 A
One year warranty
|
Test Leads, Probes, Clips
|
|
|
Fluke TL935 Patch Cords (60, 90, 120 cm)
|
|
1 pair (red, black) multi-stacking 4 mm banana plug patch cords
Nickel-plated banana plugs
60 cm, 90 cm, 120 cm long PVC insulated leads
30 V rms or 60 V DC, 15 A
One year warranty
|
Test Leads, Probes, Clips
|
|
|
Fluke TL940 Mini-Hook Test Leads
|
|
1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks
Mini-hooks attach to component leads up to 1.5 mm diameter
90 cm long PVC insulated leads
30 V rms or 60 V DC, 15 A
One year warranty
|
Test Leads, Probes, Clips
|
|
|
Fluke TL950 Mini-Pincer Test Leads
|
|
1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers
Mini-pincers open to 2.3 mm
90 cm long PVC insulated leads
30 V rms or 60 V DC, 15 A
One year warranty
|
Test Leads, Probes, Clips
|
|
|
Fluke TL960 Micro-Hook Test Leads
|
|
1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks
Micro-hooks attach to component leads up to 1 mm diameter
90 cm long PVC insulated leads
30 V rms or 60 V DC, 15 A
One year warranty
|
Test Leads, Probes, Clips
|
|
|
Fluke TLS430 Test Leads and Alligator Clips (4 black, 1 green)
|
|
Test lead replacement set for the 430 Series Power Quality Analyzer
Set includes five test leads and five alligator clips (4 black, 1 green).
Safety rating: Cat III 1000 V, CAT IV 600 V
|
Test Leads, Probes, Clips
|
|
|
Fluke 884X-RTD T100 Ohm RTD Temperature Probe
|
|
Manufactured using a coil suspension element design for increased shock and vibration resistance
Mineral-insulated sheath with a minimum bend radius of 19 mm (3/4 in) for flexibility and durability
|
Test Leads, Probes, Clips
|
|