You have 0 items in your cart.
Support
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
Fluke 289 and Fluke 289/FVF TRMS Industrial Logging Digital Multimeter with TrendCapture | Large 50,000 count, ¼ VGA display with white backlight. Multiple sets of measurement information can simultaneously displayed at the same time. Logging function with TrendCapture is an essential tool for documenting the performance of your designs, processes or systems, monitoring unattended while you work on other projects. It plots measurements as a single line to help detect signal anomalies over time, storing up to 10,000 readings. Using on-board TrendCapture, you can graphically view... | Digital Multimeters |
|
|
|
Fluke 289/FVF FlukeView Forms Combo Kit | Save when you buy the Fluke 289 Logging Multimeter with TrendCapture and FlukeView® Forms software together! The FlukeView Forms Combination Kit comes standard with: Fluke-289 True-RMS Industrial Logging Multimeter with TrendCapture FlukeView Forms Software and cable 80BK-A Temperature probe TL 71 Silicon Test Lead Set AC72 Alligator Clips TPAK Magnetic Meter Hanger for hands-free operation Soft case for meter protection and accessory storage | Digital Multimeters |
|
|
|
Fluke 289/IMSK Industrial Multimeter Service Combo Kit | Kit Includes: Fluke-289V Advanced data logging Multimeter Trendcapture:Record, graph and review measurements in the field Large 50,000 count, ¼ VGA display with white backlight. Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment LoZ Volts. Low impedance voltage function prevents false readings due to “ghost voltage 50 ohm range – useful for measuring and comparing differences in motor winding... | Digital Multimeters |
|
|
|
Fluke 27 II Industrial Multimeter | Measure up to 1000 V ac and dc Measure up to 10 A (20 A for 30 seconds) 10,000 μF capacitance range Frequency to 200 kHz Extended ac voltage bandwidth – 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz Resistance, continuity and diode test Min/Max and average recording to capture variations automatically Long battery life (800 hours) Average responding voltage and current for measurements Backlit keypad buttons allow for easy visibility in lowlit areas IP 67 waterproof & dustproof... | Digital Multimeters |
|
|
|
Fluke 28 II Industrial Multimeter | Measure up to 1000 V ac and dc Measure up to 10 A (20 A for 30 seconds) 10,000 μF capacitance range Frequency to 200 kHz Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument Resistance, continuity and diode test Min/Max and average recording to capture variations automatically Peak min-max Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy... | Digital Multimeters |
|
|
|
Fluke 28 II EX Intrinsically Safe True RMS Multimeter | 4-1/2 digit mode for precise measurements (20,000 counts) True-rms ac voltage and current for accurate measurement on nonlinear signals Measures up to 1000V and 10A ac and dc (note that Ex zones require reduced measurements) Low pass filter ensures accurate voltage and frequency measurements on variable speed motor drives (VSDs) Frequency to 200 kHz and % duty cycle to help you diagnose VSDs and switching power supplies Resistance, continuity and diode test 10,000 μF capacitance range... | Digital Multimeters |
|
|
|
Fluke 77-IV Industrial Digital Multimeter | Large display Backlight for work in dim areas Min / Max to record signal fluctuations Ergonomic overmolded housing with integrated probe holders Free your hands with the optional TPAK magnetic hanger Auto and Manual ranging Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards Free your hands with the optional TPAK magnetic hanger | Digital Multimeters |
|
|
|
Fluke 83V Digital Multimeter | Measure up to 1000 V AC and DC Measure up to 10 A (20 A for 30 seconds) 10,000 uF capacitance range 0.1% DC accuracy for precise measurements Min/Max captures signal changes Frequency to 200 kHz and % duty cycle Large easy-to-read display with backlight | Digital Multimeters |
|
|
|
Fluke 87V Digital Multimeter and 87V/E2 Industrial Electrician Combo Kit | Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87-5, 87-5/E2 Kit) True-rms ac voltage and current for accurate measurements on non linear signals (87-5, 87-5/E2 Kit) Built in thermometer (87-5, 87-5/E2 Kit) Measure up to 1000 V AC and DC Measure up to 10 A (20 A for 30 seconds) 10,000 uF capacitance range Frequency to 200 kHz and % duty cycle Peak capture to record transients as fast as 250 μs... | Digital Multimeters |
|
|
|
Fluke 87V Digital Multimeter and 87V/E2 Industrial Electrician Combo Kit | Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87-5, 87-5/E2 Kit) True-rms ac voltage and current for accurate measurements on non linear signals (87-5, 87-5/E2 Kit) Built in thermometer (87-5, 87-5/E2 Kit) Measure up to 1000 V AC and DC Measure up to 10 A (20 A for 30 seconds) 10,000 uF capacitance range Frequency to 200 kHz and % duty cycle Peak capture to record transients as fast as 250 μs... | Digital Multimeters |
|
|
|
Fluke 88-V and 88-V/A Kit Deluxe Automotive Multimeter | 0.1 % dc accuracy Current measurements up to 10 A, 20 A for up to 30 seconds Millisecond pulse width measurements for fuel injectors Optional magnetic hanger allows meter to attach to the vehicle and free your hands for other tasks Min/Max/Average recording with Min/Max Alert to capture variations automatically Peak Min/Max to record transients as fast as 250 μs Relative mode to remove test lead resistance from low ohms measurements Auto and manual ranging for maximum... | Digital Multimeters |
|
|
|
Fluke 113 Utility Multimeter | VCHEK LoZ low impedance measurement function allows for simultaneous voltage or continuity testing A large backlit display provides easy visibility in low-lit areas True-rms ac for accurate measurements on non-linear loads Record signal fluctuations using the Min/Max function Integral holster with probe holders for easy storage Auto and Manual ranging Meets measurements category CAT III 600V and CAT IV 300V standards for a higher level of safety The optional TPAK magnetic hanger allows... | Electrical Testers |
|
|
|
Fluke 1AC-A1-II / 1LAC-A-II Non-Contact Voltage Detectors | Fits in a shirt pocket for convenience Choose a model to detect 20 - 90 Volts or 90 - 1000 Volts AC Model 1AC-A1-II, 90 to 1000 VAC Model 1LAC-A-II, 20 to 90 VAC All outer surfaces are non-conductive for safety Detects voltage without metallic contact Quickly locates the hot, neutral and ground terminals in any receptacle. (1AC only) 2 Year Warranty | Electrical Testers |
|
|
|
Fluke 1LAC-A-II Non-Contact Voltage Detectors | Fits in a shirt pocket for convenience Choose a model to detect 20 - 90 Volts or 90 - 1000 Volts AC Model 1AC-A1-II, 90 to 1000 VAC Model 1LAC-A-II, 20 to 90 VAC All outer surfaces are non-conductive for safety Detects voltage without metallic contact Quickly locates the hot, neutral and ground terminals in any receptacle. (1AC only) 2 Year Warranty | Electrical Testers |
|
|
|
Fluke 2AC/90-1000V VoltAlert AC Non-Contact Voltage Tester | Voltage detection from 90 to 1000 V ac, suitable for a wide range of residential, commercial and industrial needs Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready. Innovative ‘Battery Check’ button function ensures battery is in good condition Category IV – 1000 V overvoltage rated product for best in class user protection Integrated clip design, optimized for pocket storage Fluke ruggedness and reliability Two-year warranty | Electrical Testers |
|
|
|
Fluke LVD1 Volt Light | Non-contact AC voltage detector and LED flashlight combined in one convenient, compact design With exclusive dual-sensitivity The voltage detector glows blue when it's near AC voltage, and glows red when it's at the source Detects voltages from 40 V AC to 300 V AC Voltage detector glows blue 50 Hz - 60 Hz or 2.5 - 38 cm (1 - 5") away from source Operating temperature 0 °C to 50 °C Ultra-bright white LED with 100,000 hour bulb life | Electrical Testers |
|
|
|
Fluke LVD2 Volt Light | Dual Sensitivity LED light with 100,000 hour life Detects from 90 to 600 V AC Rated to CAT IV 600 V Dual Levels of Detection Blue indicates proximity to AC Voltage source Red indicates you’re at the source Operating temperature 0 deg C to 50 deg C Ultra-Bright White LED 100,000 hr bulb | Electrical Testers |
|
|
|
Fluke T+ and T+Pro Electrical Testers | 3 forms of ac/dc voltage detection: light, sound, and vibration for added user protection and convenience Detect live voltage even when the battery is dead Extra heavy-duty, replaceable test leads for more flexibility and durability CAT IV 600 V, CAT III 1000 V rated for added user protection Continuity beeper Bright LED flashlight for work in poorly lit areas GFCI Trip On/Off switchable beeper, selectable according to your environment Compliant with latest NFPA 70E... | Electrical Testers |
|
|
|
Fluke T+Pro Electrical Testers | 3 forms of ac/dc voltage detection: light, sound, and vibration for added user protection and convenience Detect live voltage even when the battery is dead Extra heavy-duty, replaceable test leads for more flexibility and durability CAT IV 600 V, CAT III 1000 V rated for added user protection Continuity beeper Bright LED flashlight for work in poorly lit areas GFCI Trip On/Off switchable beeper, selectable according to your environment Compliant with latest NFPA 70E... | Electrical Testers |
|
|
|
Fluke T5-600 Electrical Testers | Automatically measures volts ac and volts dc with precise digital resolution Displays resistance to 1000Ω Easy and accurate OpenJaw™ current measurement Continuity beeper Compact design with neat probe storage Rugged enough to withstand a 10-foot (3m) drop Detachable SlimReach™ probe tips are customized for national electrical standards Test leads accept Fluke accessory test clips Available in 600 and 1000 Volt models Can stay connected much longer than solenoid type... | Electrical Testers |
|