|
Fluke 115/Fluke 116/Fluke 117 TRMS Digital Multimeter
|
|
Resistance, continuity, frequency, capacitance, and diode test
Measures 20 A (30 seconds momentary; 10 A continuous)
Large white LED backlight to work in poorly lit areas
Compact ergonomic design for one-handed operation
Compatible with optional magnetic hanger (ToolPak™)
True-rms for accurate measurements on non-linear loads
Min/Max/Average with elapsed time to record signal fluctuations
CAT III 600 V safety rated
|
Fluke
|
|
|
DKK-TOA XAT-200 series
|
|
Process analyzer for automating analytical techniques such as atomic absorption and etc.
Suitable for automating chemical analysis processes such as distillation, heat treatment, etc.
Example applications:
*Total chromium *Total cyanide by atomic absorption/distillation *Phenols by atomic absorption/distillation *Total mercury by oxidation-reduction atomic absorption |
Automatic Process Analyzer
|
|
|
TST0092 535, CO2 measuring instrument
|
|
TST0092 535, CO2 measuring instrument with permanently attached probe, batteries and calibration protocol
Long-term stable 2 channel infrared sensor
Highly accurate, highly efficient
Repeated calibration is unnecessary
TST0092 535, CO2 measuring instrument with permanently attached probe, batteries and calibration protocol
Long-term stable 2 channel infrared sensor
Highly accurate, highly efficient
Repeated calibration is unnecessary
|
Carbon Dioxide (CO2)
|
|
|
DKK-TOA HDM-135A(2-wire)/HDM-136A(4-wire)
|
|
Industrial pH Transmitter HDM-135A(2-wire)/HDM-136A(4-wire)
Easy-to-use pH analyzer for field installation in a compact and rigid aluminum enclosure
Easier calibration done with standard solution
Auto determination of electrode deterioration
Alterable output range
Automated self-diagnosis of fault (burn-out output)
Meas. range
-1 - 14
|
Transmitter for Industrial pH/ORP Analyzer
|
|
|
TST0077-470 Germany-made Multifunction Tachometer
|
|
rpm measuring instrument set: Instrument with SoftCase (protective case) in transport case, incl. adapter, probe tip, surface speed disc, reflectors, batteries and calibration protocol |
From Germany
|
|
|
DKK-TOA MDM-135A (2-wire)
|
|
Electromagnetic Conductivity Transmitter MDM-135A (2-wire)
Electromagnetic conductivity analyzer for field installation in a compact and rigid aluminum enclosure
Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali)
Alterable output range
Meas. range
Minimum : 0 - 2 mS/cm Maximum : 0 - 2000 mS/cm
|
Transmitter for Electromagnetic Conductivity Analyzer
|
|
|
DKK-TOA HM-30P / 31P
|
|
Standard model for pH measurement (HM-30P)
Sophisticated type, capable of pH and ORP measurements (HM-31P)
Power-saving design; rechargeable battery adaptable
Waterproof design (IP67: 1m depth, up to 30mins)
Data storage up to 1000 points
Meas. range
pH 0 - 14 (HM-30P/31P) 0 - 100.0 degrees C (HM-30P/31P) 0 - ±2000 mV (HM-31P) (ORP electrodes sold separately) |
Handheld pH/ORP Meter
|
|
|
FLU0046 Fluke 62 Max Infrared Thermometers
|
|
Takes the heat. And the dust, water and 3-meter drop. The Fluke 62 MAX and 62 MAX+ are the only mini IR thermometers you can handle without care.
|
May 2013
|
|
|
Leica DISTO D510 0.5~200m - LEI0009
|
|
NEW: The new Leica DISTO™ D510 stands for easy and effortless outdoor distance measurement. The unique combination of digital Pointfinder and 360° tilt sensor allows measurements which are not possible with conventional distance meters. In addition, with Bluetooth® Smart and attractive free apps, you are prepared for the future.
Pointfinder with 4x zoom
IP65 water jet protection and dust-tight
360° tilt sensor
Smart Horizontal Mode™
Height tracking
Bluetooth®... |
Laser Distance Meters
|
|
|
DKK-TOA AQM-100A
|
|
Resistivity Analyzer for Ultra-Pure Water AQM-100A
Compact DIN 96 size
Best suited for water quality control in ultra-pure water production lines
Two detectors connectable
Meas. range
0.00 - 20.00 MΩ・cm
|
Panel Type Resistivity Analyzer for Ultra-Pure Water
|
|
|
DKK-TOA FPM-377
|
|
PM2.5 Monitor FPM-377
Environment Ministry (JAPAN) Approval
Beta ray attenuation method (mass concentration)
Heater type dehumidifier
VSC cyclone (USEPA approval)
Outdoor type and indoor type available
Meas. range
0 - 500, 0 - 1000, 0 - 5000 μg/m3
|
Particulate Monitor
|
|
|
DKK-TOA BPM-2000
|
|
Designed for oil refinery
Automatic fractional distillate analyzer of batch distillation type enables distillation test of petroleum products such as kerosene, diesel oil, gasoline and etc.
Adopts high resolution liquid level detecting sensor
Newly-developed FA computer embedded with large-sized, color touch panel
Explosion-proof TIIS fd2G4 certified
Meas. range
Standard:Light gas oil (0 - 400 degrees C), Kerosene (0 - 300 degrees C), Gasoline (0 - 200degrees C)
|
Boiling Point Analyzer
|
|
|
DKK-TOA HM-30R
|
|
Large color graphic LCD display
0.01/0.001 pH display switchable
High-performance with the Strong&Float (internal solution concentration checker) pH electrode
USB (Host) and LAN equipped
Multiple sample measuring capability (turntable connection)
Meas. range
pH 0.000 - 14.000 0.0 - ±2000.0mV (ORP electrodes sold separately) 0 - 100.0℃ |
pH meters
|
|
|
testo 175 T1 (0572 1751) 1-Channel Temp Logger with Internal NTC Sensor
|
|
Features
One button operation - Click and “GO” button instantly starts logging and recording.
TWO standard interfaces - Mini USB and SD card for easiest direct communication with your PC - no added interface required.
Large display w/ one button backlight - For easily viewing data in poorly lit areas.
Longer battery life - Designed to conserve energy for data recording without interruption. Up to 3 years battery life. Standard battery (AA) replaceable by user.
Larger memory - Collect... |
Datalogger
|
|
|
Ex 171-3
|
|
Ex 171-3, humidity data logger %RH, °C, incl. starting magnet, battery and calibration protocol; calibration certificates (ISO/DKD) must be ordered separately
Theft-proof mounting
Control and adjustment option with adjustment set
1-channel: Internal %RH/°C
|
Datalogger
|
|
|
Guide
|
|
|
Distance meters
|
|
|
DKK-TOA WDM-135A (2-wire) / WDM-136A (4-wire)
|
|
Industrial Conductivity Transmitter WDM-135A (2-wire) / WDM-136A (4-wire)
Easy-to-use conductivity analyzer for field installation in a compact and rigid aluminum enclosure
Wide application range from ultra-pure water to wastewater
Alterable output range
Meas. range
Minimum: 0 - 0.2 μS/cm Maximum: 0 - 20 mS/cm |
Transmitter for Industrial Conductivity Analyzer
|
|
|
PAL series digital Refractometer
|
|
Easy to see and be used. Big digital reading. Water resistant. |
Digital refractometers
|
|
|
Lutron 50A/50mV SHUNT - ST-50
|
|
|
Adapter Series
|
|
|
NIC0008-CM-8826FN DIGITAL PAINT COATING THICKNESS GAUGE WITH CABLE
|
|
Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution; 0.1/1 Accuracy: 3%n or 5um |
Paint coating thickness gauges(ultrasonic)
|
|