|
YOKOGAWA PROBE POWER SUPPLY 701934
|
|
A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes. |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA PRINTER ROLL PAPER FOR DL750P AND SL1400 701966
|
|
Quality paper for the DL750P and the SL1400.Paper width: 210 mm (A4 size)Paper length: 20 mOrder Qty: 6 (1set) |
OSCILLOSCOPE ACCESSORIES
|
|
|
YOKOGAWA PRESSURE CALIBRATOR CA700
|
|
The CA700 Pressure Calibrator has a basic accuracy of 0.01% of reading on pressure measurement and 0.015% of reading on Current/Voltage source/measurement, which makes it the most accurate calibrator in the portable calibrator class. The CA700 also has the highest resolution and widest range of any hand held portable in its class with resolution of 0.001 kpa (200.00 kpa range) and a resolution of 0.0001 psi (29 psi range). The CA700 supports "As Found", "As Left" data and error rate (%). In... |
CALIBRATORS
|
|
|
YOKOGAWA PRECISION WHEATSTONE BRIDGE 2768
|
|
Model 2768 is a Precision bridge used for the exact determination of resistance in the 100 MΩ to the 110MΩ Range with an accuracy of 0.01 to 0.05%. Since this instrument includes a high-sensitivity transistorized galvanometer and bridge power source, no auxiliary device is required.
Superior resistor aliment
Minimized contact resistance
Guarding and shieldingMaterials of high insulation resistance and low absorption are employed. Guard circuits are provided to insure stable operation... |
DC PRECISION MEASURING
|
|
|
YOKOGAWA PRECISION WHEATSTONE BRIDGE 2755
|
|
Model 2755 measures resistances from 1 Ω to 10 MΩ by operation of dials and switches. Batteries and a galvanometer are self-contained. The front control panel is provided with power and galvanometer circuit selectors, one ratio arm, and four measuring dials.
Model 2755 is also equipped with a Murray and Varley Loop Tester for convenient location of line faults such as "shorts" and "grounds" in power, telephone, telegraph, and signal cables.
No auxiliary attachment required
Galvanometer... |
DC PRECISION MEASURING
|
|
|
YOKOGAWA PRECISION POWER SCOPE PX8000
|
|
Traditional power measurement instruments cannot provide accurate time measurements; oscilloscopes are not designed to measure power. The PX8000 is the world's first precision power scope, bringing oscilloscope-style time-based measurement to the world of power measurement. It can capture voltage and current waveforms precisely, opening up applications and solutions for a huge variety of emerging power measurement problems.
Localized language brochures are available below in the... |
DIGITAL POWER ANALYZERS
|
|
|
YOKOGAWA PRECISION POWER ANALYZER WT3000
|
|
The WT3000 is the ideal measurement solution for applications such as product efficiency testing, engineering, R&D work on inverters, motor drives, lighting systems and electronic ballasts, UPS systems, aircraft power systems, transformer testing and other power conversion devices. |
DIGITAL POWER ANALYZERS
|
|
|
YOKOGAWA PRECISION DOUBLE BRIDGE 2769
|
|
Model 2769 is a compact, portable Kelvin double bridge designed for measuring low resistance from 0.1 ohm to 110 ohm with four multiplication plugs and one measuring dial. It has built-in standard resistors, bridge power source and high-sensitivity taut-band suspension system electronic DC galvanometer. |
DC PRECISION MEASURING
|
|
|
YOKOGAWA PRECISION DOUBLE BRIDGE 2752
|
|
Laboratory-grade accuracy ±0.03 to ±0.05%
Quick readout without error
Excellent long-term stability: The resistance elements are made of selected manganin wire, stabilized by both artificial and natural aging after being wound.
Perfect guard system
Stable measurement: The dial switches offer low contact resistance and little change due to aging, giving stable operation. Inner/outer contact type plugs are used for changing the multiplication factor, assuring little change in... |
DC PRECISION MEASURING
|
|
|
YOKOGAWA PRECISION DC CALIBRATOR 2553A
|
|
The 2553A provides well used K,T,E,J, and an additional 6 types of thermocouples. These 10 types are all regulated in IEC. It also provides widely used Pt100 as an RTD. Resistance as well as temperature value can be set as an output value, enabling instrument calibration by both values. |
STANDARD
|
|
|
YOKOGAWA POWERVIEWERPLUS (760881)
|
|
The PX8000 Precision Power Scope was released as high frequency and transient power measurement of electric energy saving equipment. In order to support that measurement and evaluation, we released dedicated software 760881 PowerViewrPlus. This software enables measured waveform and numeric data transfer to a personal computer (PC) and realizes smooth calculation and analysis. |
POWER MEASUREMENT APPLICATION SOFTWARE
|
|
|
YOKOGAWA POWER CONSUMPTION MEASURING SOFTWARE
|
|
Power Consumption Measuring Software Now at Yokogawa we have a comprehensive solution with our new standby power consumption measurement software. Meets the Requirements of IEC62301 Ed2.0(2011) Household electrical appliances - Measurement of standby power and EN 50564:2011 Electrical and electronic household and office equipment – Measurement of low power consumption. New standby power consumption measurement software that conforms with the testing methods specified in the IEC62301... |
POWER MEASUREMENT APPLICATION SOFTWARE
|
|
|
YOKOGAWA PORTABLE WATTMETERS 2041, 2042
|
|
Model 2041 single-phase wattmeters and single-phase low-power-factor wattmeters and Model 2042 three-phase wattmeters are electrodynamometer type wattmeters with indicators based on taut-band suspension. They can handle DC and frequencies from 25 Hz to 1000 Hz, and provide excellent power factor characteristics. These instruments are shielded with dual permalloy sheets as protection against external magnetic fields. |
PORTABLE ANALOG INSTRUMENTS
|
|
|
YOKOGAWA PORTABLE POWER FACTOR METERS 2039
|
|
Model 2039 is a revolutionary series of portable wattmeters in which a power factor is used to operate the DC indicator. This is done using a transducer which provides a DC current proportionate to the voltage-current phase by means of a circuit. Model 2039 can be used in single-phase and balanced three-phase circuits. The electronic transducer, combined with a high sensitivity moving coil type indicator based on YOKOGAWA's proprietary taut-band suspension system, provides a level of... |
PORTABLE ANALOG INSTRUMENTS
|
|
|
YOKOGAWA PORTABLE OPTICAL POWER METER AQ2180 SERIES
|
|
Versatile data storage and transfer |
PORTABLE POWER METERS AND LIGHT SOURCES
|
|
|
YOKOGAWA PORTABLE OPTICAL POWER METER AQ2170 SERIES
|
|
Compact and lightweight |
PORTABLE POWER METERS AND LIGHT SOURCES
|
|
|
YOKOGAWA PORTABLE NEEDLE-INDICATOR FREQUENCY METERS 2038
|
|
Model 2038 frequency meter uses a transducer to convert a measured frequency to a proportionate DC current, then shows the current as a DC current reading. The transducer, combined with a high sensitivity moving coil type indicator based on YOKOGAWA's proprietary taut-band suspension system, provides a level of performance not possible with conventional frequency meters. In addition to frequency measurements for research labs and schools, the 2038 can be used as a standard for measurement... |
PORTABLE ANALOG INSTRUMENTS
|
|
|
YOKOGAWA PORTABLE MODULAR CALIBRATOR WITH HART® COMMUNICATIONS MODEL YPC4000
|
|
YPC4000 is a combination Calibrator / HART Communicator that reduces the time spent on field calibrations and the number of test instruments that have to be carried into the field. The YPC4000 Series delivers the versatility of a modular calibrator and the convenience of HART communications in one handheld unit. Users can view up to four measurements simultaneously on the high resolution LCD or compare HART PV and AO values to corresponding values measured. Available sensor modules include a... |
CALIBRATORS
|
|
|
YOKOGAWA PORTABLE LUXMETER 3286A
|
|
For measuring the low intensities of illumination from 0 to 300 lx in 5 ranges.
Cosine and color corrected
Output to recorder (Standard)
Taut-band suspension type indicator
Standard carrying case and pocket light
|
LUX METERS
|
|
|
YOKOGAWA PORTABLE LUXMETER 3281A
|
|
0 to 3000 lx in switch selected, three ranges
Cosine and color corrected
Compact and light weight (0.9 kg)
Output to recorder (standard)
Taut-band suspension type indicator
Standard carrying case
No power source required
|
LUX METERS
|
|